Slipgrip 1.5″ Bike Mount 4 iPhone 4 Otterbox Defender

Some news on the Slipgrip Bike mounts for us cyclists, I found a webpage for the Slipgrip products. On that page I found several new mounts that look interesting. Both do away with the ball and cup joint (although that is still available to order) and just go with straight bar. They also have them in versions that depend on the thickness of the handlebar, ranging from 1 inch to 1.5 inches. I chose the 1.5 inches as it gives me the flexibility to move it to another bike easily with the scissor type clamp that it uses. I hope to have it before the weekend as I have a long ride that I can use it on. Look for updates to this posting sometime next week.

Their new webpage can be found at SlipGripCarMounts.

Update: 09/08/2011

I finally got my new mount in on Tuesday. Upon opening the box, the first thing that I noticed was how big the clamp is. It’s huge! It looks like a crab claw. This is one beefy clamp and should quell any complaints about a flimsy clamp. There were no instructions that came with it, just the receipt. Installation is a simple process of adjusting the clamp width by spinning the cam lever until you reach the desired width. Place the clamp over the handle bar or t-bar and flip the lever. If too tight the undo the screw a little and try again. Keep adjusting until you have a nice tight grip. No need for any rubber shims either as the clamp jaws have a serrated rubber liner that grips pretty good.

The following day, I took the bike out for a spin and chose a route that takes me over several railroad tracks as well as some rough roads. I purposely placed the unit at a 45 degree angle from a horizontal position to see if it will slip. Nope. Not one bit. I am going to like this very much.

Other features includes being able to rotate the unit 360 degrees that is set on a spring tension ratchet. Just turn the unit to any spot you want and it stays there. It also has the cutout for the camera, although I don’t find it useful. I suppose you can mount the camera perpendicular to the road and use it to take pictures or videos as you are riding. I just don’t see me doing that. The case is the same as the original, but attached to a huge claw.

I paid $29.94 plus $4.95 in shipping for USPS First Class Mail, directly from their website and it took about a week to arrive.

My conclusion, it is definitely better that the original. No ball and cup joint and a much stronger method of mounting to the bike. I would definitely recommend this unit to other users of the iPhone and have the Defender series of the Otterbox.

Drop a comment if you have one yourself and share you’re experience with it.

Update: 09/16/2011

It just dawned on me that I can mount the Slipgrip on the handle bar stem. I am no longer limited to only one size of bar to mount it on, so I took it off the t-bar, opened the jaws some more, mounted on the handle bar stem and turned the case holder 90 degrees. Presto! A nice snug fit. Now I can take off the extra t-bar and declutter the front of the bike.

It has been several weeks since I’ve installed the new mount on the stem. I love it! It’s no longer in-my-face as it was when I used the T-Bar.

Update: 02/08/2012

It’s time for another update on this mount. It has been about fives months since I bought this mount and I am happy to say that I’ve had absolutely no issues with it. No wear and tear, no jury rigging, no breakage … rock solid!

Update: 05/24/2013

Some recent news has come to my attention as to the sturdiness of the bike mount. One individual had an accident with a car and the mount snapped off at the joint. Another reader has had problems with the phone popping out if he hits a jarring bump on the road. Read the comments below this post for additional details. Support from the vendor has been sketchy at best and that is a shame.

I like simple homemade solutions to problems that I have. If I had the problem of the phone popping out I would look to see if a rubber band on the top and bottom will keep it in place. It’s a simple solution that I would use as a temporary fix as I look for a new mount.

My current recommendation as been altered now because of the feedback you have provided. I recommend the use of this bike mount for leisurely rides at a slow pace (10 mph or less), for a baby stroller, or anywhere you want to mount the phone to jam to some tunes. For faster rides or rides on bumpy roads I do not recommend it.

Not to leave you hanging as to what else you can use, here are some options to consider (in no particular order).

1. iBike – Phonebooth products for both the iPhone 4 and 5 series that are water-resistant with secure mounts. I have used the iBike Dash case and like it.

2. Wahoo Fitness – They have several bike mounts worth looking into as well as the remote display called RFLKT. The RFLKT is an interesting product. You mount it to the bike and sync it with one of many cycling apps. Once synced, ride data is displayed on unit and you can put your iPhone in your pocket or bike bag.

3. LifeProof – Not only a pretty solid case but they also have a bike mount too. Not sure if it will survive an accident with a car, but how often is that? Other than that, it looks like the phone won’t be popping off if you hit a hard bump.

4. Quad Lock Mounting System – Something that came from a KickStarter project that looks pretty good. Neat locking mechanism that can be used in multiple ways. Take a look at the video of them mountain biking with the iPhone mounted.

If you have had any experience with the four suggestions above, drop me a comment and let us know what you think of it.

Update: 06/27/2014

I’ve been using the Quadlock Mounting System on my bike for a while and love it. Check out the post about it: Quadlock Case for iPhone 5 Yes, the Quadlock supports other phones.